Full-Area Moisture Mapping
We take multiple readings across walls, floors, or crawlspaces to build a pattern rather than relying on one spot check.
Find the moisture before it becomes mold
Moisture Detection and Mapping in Stillwater
Moisture that's already visible is moisture that's been building for a while. We map it before it gets there, using meters and infrared imaging to see what's happening inside walls, under flooring, and in crawlspaces most Stillwater homes never look at.
Careful work. Honest options.
About this service
Why Mapping Matters More Than a Single Reading
One moisture reading tells you there's a problem. A map tells you how far it's spread and where it's coming from. We take readings across an entire wall, floor, or crawlspace and record them as a pattern, not just a single number, because the pattern is what points back to the source.
Crawlspaces are a common blind spot in older Stillwater homes, especially those without a modern vapor barrier. Humidity trapped there condenses on cool surfaces and, over years, feeds mold growth and wood rot that homeowners often don't discover until it reaches the subfloor.
- ✓ Moisture readings mapped across the affected area, not a single spot check
- ✓ Crawlspace and attic inspection included
- ✓ Infrared imaging identifies moisture behind finished surfaces
- ✓ Source identification, not just symptom confirmation
What's included
What's Included
We look at the whole pattern, not just the spot you noticed.
Infrared Imaging
Shows temperature differences that indicate moisture behind drywall, flooring, or ceilings without opening anything up.
Crawlspace and Attic Checks
Two of the most common places moisture builds unnoticed in older Stillwater homes, especially those without a vapor barrier.
Source Tracing
We don't stop at confirming moisture is present. We work to trace it back to a leak, condensation, or ventilation issue.
How it works
What to Expect
Tell us what's prompting the concern, a musty smell, visible staining, or a known past leak you want checked.
We take baseline readings across the area of concern to establish where moisture levels are elevated.
Thermal imaging extends the survey behind walls and under flooring without any cutting or drilling.
If accessible, we check these areas directly, since they're common sources of hidden moisture.
We present the moisture map and explain the likely source, along with next steps.
STEP 01The Call
Tell us what's prompting the concern, a musty smell, visible staining, or a known past leak you want checked.
Tools & methods
Tools We Use
Pin and Pinless Moisture Meters
Used together to get both surface and subsurface moisture readings without unnecessary drilling.
Infrared Camera
Extends detection behind finished surfaces by reading temperature differences caused by moisture.
Hygrometer
Measures relative humidity in crawlspaces and attics, useful for identifying condensation risk even without an active leak.
Borescope
A small camera that can inspect inside a wall cavity through a minimal access point when needed.
Real results
Before and after.
Moisture Detection and Mapping
Crawlspace Humidity Near Washington Street
A homeowner near Washington St and Hall of Fame Ave noticed a musty smell in the living room with no visible water.
After: Crawlspace inspection found high humidity and no vapor barrier. Moisture mapping confirmed it was condensation-driven, not a leak, and pointed to a ventilation fix.
Book this service →
Moisture Detection and Mapping
Attic Moisture Above a Rental Near Knoblock Street
A landlord near Knoblock Street had a tenant report a ceiling stain that reappeared after every rain.
After: Infrared scanning traced the moisture path from a roof flashing failure, not the plumbing the landlord had suspected.
Book this service →
Moisture Detection and Mapping
Wall Cavity Mapping in a Historic Subdivision Home
A homeowner in College Gardens noticed peeling paint on an interior wall with no obvious cause.
After: Moisture mapping traced elevated readings back to a slow supply line leak two stud bays away from the visible damage.
Book this service → Problems we solve
Common Problems Solved
Most moisture problems start hidden and stay that way until they're mapped.
Ask a pro →Crawlspace humidity without a vapor barrier
Common in older Stillwater homes and a steady contributor to mold risk even without an active leak.
Moisture spreading further than the visible stain suggests
A single water stain rarely marks the full extent of the problem underneath it.
Condensation mistaken for a plumbing leak
Humidity and temperature differences can mimic leak symptoms, and mapping helps tell the two apart.
Proof you can check
Trust and proof of our services
- Licensed through the Oklahoma Construction Industries Board
- Insured and bonded for work throughout Payne County
- Every finding documented in writing before repair begins
Customer reviews
What our customers say about moisture detection and mapping
★★★★★
“Leak Radar's moisture detection service was thorough and professional. They found a hidden leak in my basement that saved me thousands in repairs!”
SL
Sarah L.Homeowner, Westwood
✓ Verified“
★★★★★
“I relied on their moisture mapping services for my store, and they identified several issues quickly. Their team was knowledgeable and efficient.”
JD
John D.Business Owner, Downtown Stillwater
✓ Verified★★★★★
“I was impressed with the detailed report provided after the moisture inspection. It helped me understand the issues in my home and how to fix them.”
ER
Emily R.Homeowner, College Gardens
✓ VerifiedMoisture mapping identifies where and how much water is present, which is often the root cause behind mold. We can flag areas that warrant a separate mold inspection if conditions suggest it.
In most cases yes, using moisture meters and infrared imaging. A borescope, which needs only a small access hole, covers the rest.
Most moisture mapping visits run $175 to $450 depending on the size of the area and whether crawlspace or attic access is involved.
Humidity rises. A crawlspace without a vapor barrier can be the actual source of moisture that shows up as a stain or smell a floor or two above it.
Ready when you are
See What's Actually in the Walls
A moisture map shows the pattern, not just the spot. Call to schedule.
Schedule a consultation (405) 872-2665 →
Request an appointment
Contact Us for Leak Detection
Reach out to us for any leak detection needs. We respond quickly and are available for consultations during business hours.
Call anytime(405) 872-2665Email the officeinfo@leakdetectionstillwaterok.online
Office hoursOpen 24 hours · 7 days a week